RocketFish Video Gaming Accessories RF GPS31102 User Guide

Indicator status:  
Using the dual charge station  
Charging your controllers:  
PS3 Starter Kit  
The LED indicators on the front of the controllers flash while charging and  
turn off when fully charged.  
1
Plug the AC power adapter into any available AC power outlet.  
Safety  
2
Connect the AC power adapter’s USB connector to the dual charge station.  
The blue LED indicator on the charge doc remains on while a controller is  
attached to the charge station, regardless of the controller’s recharging status.  
Warning: Some medical studies have suggested that long periods of repetitive motion  
may be linked to certain types of physical discomfort or injuries. You should take frequent  
breaks during game play. If you feel aching, numbness, or tingling in your arms, wrists, or  
hands, consult a qualified health professional.  
Using the Bluetooth headset  
Warning: The starter kit contains small pieces that may pose a choking hazard to small  
children. Keep the kit components away from small children.  
Warning: To prevent fire or shock hazard, do not expose the starter kit to rain or moisture.  
Warning: Never insert objects into the starter kit components, because they may touch  
dangerous voltage points or short out parts, which can result in fire or electrical shock.  
Caution: Do not disassemble or damage any of the starter kit components. Refer all  
servicing to qualified personnel.  
Caution: Keep the starter kit out of direct sunlight for extended periods of time.  
Caution: Use the starter kit only as instructed. Read all instructions before operating.  
Caution: The wall adapter (AC) must not be used to power the charger if the plug or cord  
is damaged. The plug must be easily unplugged from the wall outlet.  
1
2
3
Multifunction button  
Indicator  
4
5
6
Volume up and down  
Clip  
Microphone  
Charging connector  
3
Attach the Sony PS3 controllers to the charge station. The blue charging  
indicator on the charge dock lights up when the controller is connected.  
Package contents  
The Bluetooth headset must be fully charged before using it for the first time.  
Dual charge station (for PS3 controllers only)  
Dual charge station AC power adapter  
Bluetooth headset  
Headset ear clip  
Headset USB charge cable  
Console stand (for PS3 2nd generationslimconsole model only)  
Quick Setup Guide  
Not included: PS3 controllers  
To charge the headset:  
1
2
Connect the charge cable to the charging connector on the headset.  
Connect the charge cable to the PS3 or any standard USB port. The indicator  
on the headset turns red while charging and turns blue when fully charged.  
3
Disconnect the charge cable from the headset when the headset is fully  
charged.  
Charging indicator  
Charging indicator  
 
RF-GPS31102  
QUICK SETUP GUIDE  

Q See DVR QR4174 418 User Guide
Raymarine Fish Finder L265 User Guide
Raymarine GPS Receiver RS12 User Guide
Roland Drums TD 15 User Guide
Rotel Stereo Amplifier RA 980BX User Guide
Samsung Computer Monitor 20080828210016437 User Guide
Samsung DVD Player DVD E360 ZA User Guide
Sanyo Air Conditioner 42TW72R User Guide
Sanyo Projector XP17B User Guide
Satco Products Indoor Fireplace CF260E B User Guide